Hurd Precision Co., Ltd.
ACP Actuator Control Panel
Inching｜Remote Control｜Speed Regulation
Emergency Switch | Upper and Lower Limits
Overview
ACP10 is a small and lightweight control circuit board with a set of drivers. It can drive linear actuators with a maximum current of 10 amperes in total.
It mainly has a set of H-bridge drivers and a 20-pin microprocessor with 6+5+1 output/input contacts. Sensors and output/input devices can be connected externally to control the operation of the H-bridge driver.
ACP10 needs to be supplied with DC power from the outside, which can be easily matched with a local qualified power supply according to customer needs.
Product Code
ACP - XXX - XXX - XX - X
Stroke Load Voltage Function
Please kindly indicate your demand with the above coding principle while contacting us, thanks.
Stroke Setting, Work With Switches.
Sometimes the existing product does not fit perfectly with your demand. For example, you could hardly find an actuator with stroke 170mm from the market but that is what you actually need.
Not a problem, just connect our actuator with external reed switches, adjust the stroke, and everything is done.
Function S: Stroke setting, 2 sets of wiring (4 wires) total for the upper and lower limits. It can be connected to your own A-contact switches, such as reed switches, limit switches, push switches, tact switches, etc.
Function R: With built-in reed switches and a magnetic ring, the position of movement can be sensed to stop at any position.
Hall Sensor for Accurate Positioning.
Function H: With a built-in hall sensor, positioning signals could be retrieved to your PLC for dedicated relative positioning.
A Hall sensor is a type of sensor which detects the presence and magnitude of a magnetic field using the Hall effect. The output voltage of a Hall sensor is directly proportional to the strength of the field.
Certificates
CE:EMC
IP Rating 66
RoHS
Contact Us